Prova 2003 - SINCRO automotive tester attrezzature diagnostiche per officine

•    Conceived for the best price - quality relationship, useful for measurements of current, voltage, frequency, resistance, continuity and for diode checks on trucks, agricultural machines, earth moving machines and industrial engines.

•    Measurement of minimum and maximum currents with peak storage on command cables of solenoid actuators with the engine running or on the fuse box through jumper-adapter. It does not affect the systems’ operation and avoids the switching on of warning lights or fault codes in the historical memory of the ECU.

•    Current absorption on the steering column, fuel pump, ECU for glow plugs’ warm-up, fuel warm-up, air conditioning, lighting and signalling system, charging and cranking system.

TECHNICAL FEATURES
–    Range selection:               manual or automatic
–    Continuous current:    1 A    ÷    2500 A
–    Alternating current:    1 A    ÷    2100 A
–    Continuous voltage:    0.1 V    ÷    600 V
–    Alternating voltage:    0.1 V    ÷    600 V
–    Resistance:    0.1 Ω    ÷    40 MΩ
–    Frequency:    100 Hz    ÷    1000 kHz
–    Continuity:                        beeper
–    Diode checker
–    Clamp’s internal diameter:  55 mm approx.
–    Zero reset through button
–    Peak memory through button
–    Analog output for oscilloscope
–    Power supply:     One 9 V battery
–    Dimensions:       27 (L) x 11 (W) x 4.6 (H) cm
–    Weight:             650 g (battery included)

ACCESSORIES
Transport bag, red and black clips, instruction manual