BT501s - SINCRO automotive tester attrezzature diagnostiche per officine

BATTERY TESTER

•    Solidly built with quality tested materials for a continuous operation.
•    Allows to test and foresee the re­pla­ce­ment in time of 6 and 12 V batteries of cars, commercial vehicles, boats. Tests 24 V batteries (2 x 12 V in series) of trucks, agricultural and ­in­du­strial vehi­cle­s without disconnecting cables.
•    Allows to test batteries with liquid or GEL electrolyte, type: SLI, VRLA, SLA and AGM, built with flat or spiral elements.
•     Possibility of choosing among different CCA stan­dard ­me­a­su­re­ments, according to marking of bat­te­ries.
•    Tests carried out in a few seconds on batteries in stock or on the vehicle with pre­set­ting of CCA (Cold Cranking Amps) shown on the battery label.
•    Simple and clear messages on LCD display, drive the operator in all the tests by giving useful diagnostic and operating instructions up to printing of test ticket.

Charging and Cranking System Test
•    Voltage measurements for checks of alternator, diodes and regulator at different speeds.
•    Diagnosis of starter motor’s efficiency through measurements of battery voltage drop.

TECHNICAL FEATURES
•    Battery analysis:                6 and 12 V
•    Charging system:              12 and 24 V
•    Voltage measurements:    1,5 ÷ 30 V (± 0.05 V)
•    Display:                            LCD, 2 x 16 characters
•    CCA (standard):    SAE:     40 ÷ 2000 A
                               EN:    40 ÷ 2100 A
                               IEC:    30 ÷ 1500 A
                               DIN:    25 ÷ 1300 A
                               JIS:  (Battery Type No.)
•    CCA accuracy:                 ± 5%, 1 A resolution
•    Operating temperature:    0 ÷ 50°C
•    Printer:                            thermal, 16 columns
•    Power supply:                  4 x1.5 V batteries
•    Dimensions:                    18.5 x 10 x 3.5 cm
•    Weight:                           600 g

OPTIONS
•    MM 2356    – Protective holster.
•    IM 0310      – Plastic carrying case.

PATENTS
Europe – USA – Taiwan – China